Yeat, Thanks for the reply . I don't want two distinct lines( now I am manipulating it in that way) . Was trying to achieve in one line itself. For forecast scenario, it is fine. But may not be for the others .
Sree
↧
Re: SAPUI5 : Line chart with multi colour
↧
Re: Issue in Triggering Workflow from WDA Application
Hi Kiran,
I thought of the same thing and it will work for sure.
But i want deploy it inside WDA method itself.
I know creating a FM wont be tedious or stressful but would like to know why MACRO coding is hard inside WDA ?
Or is it possible to use FM SWC_TABLE_SET by using table parameters of field symbols .
Thanks a lot for your quick response Kiran.
↧
↧
Re: "Error: Requested resource does not exist." error in ESS landing page in EHP7
have u activated this business function in SFW5 once check it .....
HCM_ESS_UI5_1
HCM_ESS_UI5_2
HCM_MSS_UI5_3
HRESS_SFWS_UI5_UI_01
HRPAO_SFWS_UI_ES_01
↧
Routing from tables
Dear SAP-gurus,
I am trying to pull a routing out of sap tables for a specific material, since I need the processing time and setup times in total. I can find these values in PLPO.
I have tried the following:
1. Put the Material in MAPL. Since there are multiple routings, but only one without deletion flag, I select on this field (LOEKZ).
2. Then I put the value of group (PLNNR) and group counter (PLNAL) into PLKO. This results, as expected, into 1 hit.
3. I put all common values (between PLKO and PLPO) into PLPO (group, created on, changed on, created by etc,..) . Then however, I get a large number of hits, including multiple duplicate work centers.
I just need the routing as can be found in CA03, this routing is correct. Do I miss a table? How do I get the correct routing from PLPO?
Thanks for your help in advance!
↧
Re: Issue in Triggering Workflow from WDA Application
Thanks a lot for your quick response Felipe.
I have done all what you have mentioned.
The issue does is now how am i going to populate the container element and pass to WF but while doing so for multiple like container element im not able to do so in WDA itself.
Pls suggest if you have come across anything i have mentioned
↧
↧
Re: Query for Custom BO from Node 0..N is not working
Hi Ludger,
I think you mis understood me , I dont want to fetch Related Opportunities...
I have a BO : Sy_trade and each instances of that BO Can have N Opportunities...
So we have a link to Trade -- Opportunity and one opportunity can be there in multiple trade.
Now i am creating an EC to be shown in Opportunity where i can pass opportunity Id and Fetch the Trade....
I want to passs ID or uuid of Node Opportunity which has 0 to N cardinality and fetch trade against it...
For example you can see the all the Opportunity in the Account and if you check the Query they have used SADL Query on opportunity passing party id i think..
but my frustration is SADL query is not possible in EC...
Hence i do i fetch ALL TRADES instance based on its child node which have 0 to N cardinality
how can i do that?? i think your second option seems perfect i ll go through it...
Regards,
Dhruvin
Message was edited by: Dhruvin Mehta
↧
Re: Issue in Triggering Workflow from WDA Application
Thanks a lot for your quick response Jaydeep.
Binding in WF is all set and is good to go.
The problem is inside the WDA application.
↧
Re: acess right for WebI only...
HI
yes if requirement is user can not access IDT and can create/run the report then it is fine.
BO security is more depend on the business requirement.
↧
Re: Sale Return
Above is the screen shot of our flow
Original Invoice 0401260590 against which rejection is booked 0180039634
So is there any table or combination from where we can get above details.
Regards,
Avinash
↧
↧
Re: Sale Return
Hi,
If you have created return w/ref to billing document, then you will get the details under the document flow of billing document. Go to VF03, click on document flow button.
Regards,
Mukthar
↧
SAP_CR update not possible
i have set up a local SLD in XI system by importing a FULL export of an existing system.i will use this system independently.after import in target it shows as below.
Model Version (sld/active): 1.6.36
SAP CR Content Version (sld/active): No versioned SAP CR imports detected
Other Import Content Versions (sld/active): ALL 1.0 (produced 09/14/2014)
as you see no versioned SAP CR content is imported as it was only import of FULL export.
the SAP CR content in the source system was SAP_CR 9.9.Now i want to update SAP_CR content in target system to higher level (12) but it does not allow and gives the message "The selected import contains updates for export line SAP_CR. So far, no data
has been imported for this export line. Before importing the selected aggregate
import, a full import of export line SAP_CR is required."
how can i update SAP_CR in this scenario ? which level of SAP_CR i need to import ? remember the source already has level 9.9 and it will be available in the target. please reply.thank you.
↧
Re: database connection issues
Dear Community members
how can help me to solve this critically Issue
any help will be welcome
Thanks best regards
M.Sobh
↧
Re: Join on Substring
This is simple. You can directly do this in where clause. Considering your field name in both tables are ID.
Table_1.ID=cast( substr(Table_2.ID,2,length(Table_2.ID )),'INT')
- substr : it will read string from 2nd character till end.
- Cast is being used to suppress the warding message in case first table field ID is in int. You can remove casting in case your both tables have varchar for these fields.
Hope this helps.
Regards,
Ansari MS
↧
↧
Re: EVERH Error
Correction
Start date of 2nd time slice EVERH-AB = END Date of 1st time slice EVERH-BIS + 1.
↧
Re: SAP COPA DataSource Creation
Hi,
I am having fields in Table CE1XXXX, but i am not able to find these while creating the datasource.
How can i get these Table fields into my Datasource.
Fields in CE1XXXXtable are given below
| HZDAT |
| USNAM |
| PERDE |
Mentioned above fields are required in my Datasource.
Please do help in rectifying this issue.
↧
Re: PB 11.5.1 - any options for scheduled reporting?
Hi...
I think that some answers are missing from that discussion... I know there were answers from Brad Mettee and Scot Morris and Roland Smith... I saw them in my mail. Is any issue with the discussions?
Andreas.
↧
Re: equipment history based on Superord.Equip.
Hello mahesh,
There are several ways.
1. Through IE03 --> Extras --> Usage list
You will get a report of list of Superord. Equipment and F/Locn where all the present equipment moved.
2. Through IH08 report
Give Period Frm date longback (as many years as you want) and to date current date,
and then if you want similar report as above Give Equipment number and execute. Same report as above appears.
If you want a Superord. Equipment based report, then instead of filling Equipment field fill Superord. Equipment field and execute. Here you will get a report where you will see a list of what all equipments had come and gone under this Superord. Equipment.
3. You can get this information directly from EQUZ table also. You can view through Tcodes SE11 or SE16.
KJogeswaraRao
↧
↧
Re: What conferences are worth attending? The results are in and it looks bad for ASUG
Hi Kevin
69 votes probably does not make this statistically valid/relevant to make such a judgement call. GGOPII mentioned one factor - of those 69 people how many are in the Americas?
Within the breakdown, I think you need to take into consideration what is being offered at the events and what your background is. Larger events will have more variety and offering so that would make sense that they have greater interest.
Your blog about ASUG is a different matter and seems to have some good feedback 
Regards
Colleen
↧
Re: Machine History
Hello Sushant,
Some more points (IH08) I missed mentioning in my reply above, I mentioned here in this thread equipment history based on Superord.Equip.
↧
Re: SAP HANA
Hi Siva
First up if it's your friends career I would highly recommend they do their research and ask the question. Breaking into the SAP industry is going to take hard work. It's not a good indication if a friend is taking the first steps for you.
My first step for your friend is for them to go to do basic research of what HANA actually is and what content is out there. AS a hint, if you were to search this space you will see career advise for HANA asked a few times and tips to begin with mentioned.
Possibly the reason no one has replied to you is because your question is quite vague. There is very little information about your friend's background beyond some SQL training.
Interesting it's almost a year since you first asked the question?
Regards
Colleen
↧